Succeed Hotline:


Home > Product > Sand Making Equipment >

Vibrating Feeder

Vibrating Feeder 

product description:

     Also known as feeder vibration feeder. I produced GZD feeder series, it is designed for pre-crushing and screening coarse crusher evenly conveying bulk materials and the design of the new feeder. The feeder double eccentric shaft vibration exciter structural characteristics, to ensure that equipment can withstand the impact of falling bulk materials, the ability to feed large. Can be massive, granular materials evenly in the production process from the silos, the timing, continuously to go to the affected device, thus preventing the feeding device due to uneven feed produced crash phenomenon, extended equipment life. Feeder can be divided grate and steel structure construction, steel structure of feeder used for aggregates production line, the material evenly into the broken equipment; grate structure feeder material can be coarse screening make the system more economical in the preparation, in the crushing and screening equipment as necessary. Thus vibrating feeder is widely used in crushing, screening plants metallurgy, coal, mineral processing, building materials, chemicals, abrasives and other industries in.

working principle:

     GZD series feeder is made to the trough body, exciter, spring bearing, gear and other components. Vibration source vibration feeder tank is exciter, exciter by two eccentric shaft (active and passive) and gear pair composed by motor through V-belt driven drive shaft, and then from the drive shaft gear driven shaft rotation, active and passive reverse rotation axes simultaneously, the groove body vibration, so that a continuous flow of material, the purpose of conveying material.
 GZD series vibrating feeder structure is simple, uniform feeding, continuous performance, exciting force adjustable;
 Subject to change and control the flow, easy to operate;
 Eccentric block vibration source, low noise, low power consumption, good adjusting performance, no red material phenomenon;
 If a closed fuselage to prevent dust pollution smooth vibrating, reliable operation and long life;
 Exciting force can be adjusted, subject to change and control the flow, easy to adjust and stable;
 Vibration motor as vibration source, low noise, small power consumption, good adjusting performance, no red material phenomenon;
 Feeder structure is simple, reliable, easy installation adjustment, light weight, small size, easy maintenance;
Simple GZD Series Vibrating Feeder structure, convenient operation, without Moist, small power consumption;
 You can even adjust to the amount of ore; generally used for loose materials. An apparatus according to performance requirements, the configuration should be designed to minimize the pressure on the material of the tank, the effective discharge port warehouse material shall not exceed one-quarter of the width, material flow rate control in 6-18m / min. For the feeding amount large material hopper bottom discharge should be set high enough to intercept mine board; to not impact the performance of the feeder, stopped mine board shall not be fixed on the tank. In order to smooth discharge silo, hopper rear wall angle is preferably designed as 55-65 degrees.
Model Feed Spout Size(mm) Max Feeding Size(mm) Capacity(t/h) Power(kw) Overall Dimension
GZD-850×3000 850×3000 400 80-120 7.5 3110×1800×1600
GZD-960×3800 960×3800 500 120-210 11 3850×1950×1630
GZD-1100×4200 1100×4200 580 200-430 15 4400×2050×1660
GZD-1100×4900 1100×4900 580 280-500 15 5200×2050×1700
GZD-1200×4900 1200×4900 580 280-550 15 5200×2150×1800
GZD-1300×4900 1300×4900 650 450-600 22 5200×2450×1850
GZD-1300×6000 1300×6000 700 450-600 37 5200×2350×1950